Shanghai Huitian New Material Co., Ltd

Bond today and future ,with our technology!

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsPolyurethane Windshield Adhesive

Polyurethane adhesive glue HT968 single component car window seal adhesive

Polyurethane adhesive glue HT968 single component car window seal adhesive

    • Polyurethane adhesive glue HT968 single component car window seal adhesive
    • Polyurethane adhesive glue HT968 single component car window seal adhesive
  • Polyurethane adhesive glue HT968 single component car window seal adhesive

    Product Details:

    Place of Origin: China
    Brand Name: Huitian (Weeton)
    Certification: ISO
    Model Number: 968

    Payment & Shipping Terms:

    Minimum Order Quantity: 1000 pics
    Packaging Details: 310ml/Catridge,24 Catridges/Carton,
    Payment Terms: D/P, L/C, T/T
    Supply Ability: 10000 pics per day
    Contact Now
    Detailed Product Description
    Component: One Color: Black
    Density: 1.21 G/cm3( ℃) Touch Curing: 45 Min
    Solid Content: 99 % Curing Speed: 3.7 Mm/24h
    Tensile Strength: 6 MPa Elongation At Break: 500 %
    Tear Strength: 25 KN/m Harness: 50 Shore-D
    Work Temperature: -40~90

    Polyurethane adhesive glue HT968 single component car window seal adhesive

     

    HT968 is a single component, black, low viscosity, high strength, low odor polyurethane adhesive. Cured adhesive is elastomers, anti cold and hot change, good resistance to stress change performance.

     

    Typical use

    Assembly adhesive used for engineering machinery, automobile, shipbuilding and other cab windshield, and the bonding part of the metal structure of the seal.

     

    Characteristic before curing

    Representative value range

    A component

    Color Black

    Density g/cm3(25℃) 1.21 1.15~1.25

    (GB/T13354-1992)

    Touch Curing(min) 45 20~60

    (23℃/50%RH)

    (GB/T13477.5-20)

     

    Characteristic after curing

    Tensile strength MPa 6 ≥ 5

    (GB/T528-1998)

    Elongation at break (%) 500 ≥ 450

    (GB/T528-1998)

    Tear strength KN/m 25 ≥ 20

    (GB/T 529)

    The shear strength of /MPa 4.2 ≥ 4

    (GB/T 7124)

    Harness: Shore-D(GB/T 531-1999) 50-65

    Work Temperature℃ -40~90

     

    Instructions for use

    Surface cleaning: clean surface: remove the rust, dirt, water and oil etc..

    Sizing: cut a small hole in the beak suitable rubber barrel, glue mouth diameter should be considered sizing width and decide, into the glue gun start sizing operation.

     

    Primer:

    to be with the back glass processing agent uses the specified. Glass processing agent to wait for the volatile drying time routine for 10-30 minutes, depending on the specific time when the environment temperature and decide, after the primer coating evaporation drying after the start of sizing.

     

    Curing:

    a large temperature and humidity environment on polyurethane adhesive surface drying and curing effect, low temperature, curing slow; temperature and humidity is too high, dry too fast. The best operating environmental conditions: temperature 20 to 30 DEG C for 50 ~ 70%RH, humidity exceeds 5 to 35 DEG C; the temperature, humidity 35 ~ 75%RH range please careful construction.

     

    Polyurethane adhesive in sizing and curing process, avoid contact with chemicals containing hydroxyl, amino and, this kind of material will cause the polyurethane glue curing incomplete.

     

    Storage:

    unused plastic blocks should be tightened immediately, to seal the tube mouth save. Again, if sealed, a little crust, remove immediately after, does not affect the normal use. In the process of storage, the nozzle may also appear a few crusts, remove after normal use, does not affect the product performance.

     

    The matters needing attention

    Keep away from children.

    If you accidentally come in contact with the skin, wipe in the curing a cloth before class, and using alcohol solvent scrubbing.

    If the case of contact with eyes, rinse immediately with water, and medical treatment.

    Recommended for use in a well ventilated place

    Product safety data please refer to the product MSDS.

     

    Package
    300ml/Catridge,24Catridese/Carton

    Each unit Each carton
    300ml/Catridge 24Catridese/Carton
    400ml/sausage 24 sausages/barrel


    Storage
    Store in cool and dry place 5-25 C
    Storage period: Catridges for 9 months
    Sausage 6 months

     

    Polyurethane adhesive glue HT968 single component car window seal adhesivePolyurethane adhesive glue HT968 single component car window seal adhesive

    Contact Details
    Shanghai Huitian New Material Co., Ltd

    Contact Person: Mr. Jason Zhang

    Send your inquiry directly to us (0 / 3000)

    Other Products