|
| Place of Origin: | CHINA |
| Brand Name: | HUITIAN |
| Certification: | SGS |
| Model Number: | 0115 |
● Product Features:
Ø Single component, white color.
Ø Physical form: paste
Ø Made of metallic oxide and polysiloxane
Ø Wide operating temperature range
Ø Nontoxic, non-corrosive
Ø Eco-friendly, odorless
Ø Doesn’t go dry and flowing at high temperature.
Ø High performance on insulation, damp proofing, corona resistance, electric leakage resistance and chemical resistance.
Ø Can be dispensed both by hand or machine.
Ø Heat conductivity coefficient: 1.6W/(m·K)
● Main Applications:
Ø Widely used for the thermal conductivity of electronic components including the filling of gap between CPU and heat sink.
Ø For the filling of gap between high-power audion, thyrister and basic materials such as copper and aluminum to reduce the temperature of electronic components.
● How to Use
Ø Stir this product before using if it’s long time unused.
Ø Clean the object surfaces to get rid of oil and dirty before use.
Ø The object surfaces should be even and uniform.
Ø To dispense smoothly, please stir for 2 minutes before use.
Ø Apply a little for try before massive use.
Ø Only a thin layer of this product needed for use to avoid wastes.
Ø Do not keep this product exposed in the air for a long time.
● Technical Data
| Item | Unit | Typical Value |
| Item No. | 0112 | |
| Physical Form | paste | |
| Color | white | |
| Main Component | polysiloxane | |
| Density | g/cm3 | 2.7 |
| Penetration Degree | 1/10cm | 310 |
| Volatility(200℃,24h) | % | 0.2 |
| Volume Resistivity | Ω*cm | 1.0×1015 |
| Dielectric Strength | KV/mm | 24 |
| Breakdown Voltage | KV/mm | 20 |
| Surface Resistance | Ω | 2.5×1014 |
| 0.1mm Thermal Resistance | m2K/W | 0.00014 |
| Work Temperature | ℃ | -50~200 |
| Heat Conductivity Coefficient | W/(m·K) | 1.6 |
● Packing:
Ø 2kg/bucket, 6buckets/carton
● Storage:
Ø Store it in dry and shady places at the temperature of 8~28℃
Ø Storage life is 12 months from the date of manufacture.
● Caution:
Ø Keep it away from children.
Ø In case of contact with skins, wipe and then flush with clear water.
Ø In case of contact with eyes, flush with clear water immediately and go to hospital for checking.
Ø For the use of this product, it’s not the more the better but the thinner the better under the condition of full filling of gaps is assured.
