• 6321C EPOXY Electrical Potting Compound for Hollow fiber membrane modules
6321C EPOXY Electrical Potting Compound for Hollow fiber membrane modules

6321C EPOXY Electrical Potting Compound for Hollow fiber membrane modules

Product Details:

Place of Origin: CHINA
Brand Name: Huitian
Certification: SGS/NDF
Model Number: 6321C

Payment & Shipping Terms:

Minimum Order Quantity: 200KG
Price: Negotiation
Packaging Details: A:200kg/drum,B:200kg/drum;A:25kg/pail,B:25kg/pail
Delivery Time: 5-8 WORK DAYS
Payment Terms: L/C, T/T
Supply Ability: 100 TON MONTH
Get Best Price Contact Now

Detail Information

Appearance: B Amber Liquid Packaging: 5 Or 55 Gallon
Viscosity (mPa.s) (GB/T10247-2008): 2200±300 Mixture Viscosity: 1400
Mix Ratio: 1.68:1 By Volume Working Time(23℃): 90 Minutes
Cure Time: 80℃ Condition, 2 Hours
High Light:

Silicone Potting Compound

,

potting compound for electronic components

Product Description

6321C EPOXY Electrical Potting Compound for Hollow fiber membrane modules

6321C is a two component EPOXY adhesive product, specially developed for Hollow fiber membrane modules.

6321C is a two component EPOXY adhesive product, specially developed for Hollow fiber membrane modules. It has excellent properties as low viscosity, low hollow fiber climbing height, low heating point, room temperature curing, long working time and low shrinkage. Glue cured with high hardness,high compressive strength and good chemical material resistance.

 

Typical application
Used for the assembly of Hollow fiber membrane potting.

6321C EPOXY Electrical Potting Compound for Hollow fiber membrane modules 0

6321C EPOXY Electrical Potting Compound for Hollow fiber membrane modules 1

 

How to use
1.Clean up the surface of bonding materials, keep dry and clean. Oil or dusty may influence the adhesive properties.

2.Stir the component A before use, mix the glue completely 2:1 by weight, we recommend using auto-mix equipment, or the mixed glue should be handled by vacuum system before operation.
3.Dispensing the mixed glue into the potting position.
4.Wait over 8 hours, then transfer to the next process, if in winter low temperature, can be heated for faster cure.


Cautions
1. When Manual mix, please don’t mix too much glue one time, and use the mixed compound as soon as possible.
2.The component A may be a little higher viscosity in winter low temperature, we suggest you pre-heat over 2 hours under
30℃, please keep the packaging open, to avoid the gas expand, what may destroy the container.
3.Seal the unused glue for next time use, contaminated glue should no longer put into the original packaging pail.
4.Keep away from the children
5. Please refer to the product MSDS for safety information.


Packaging
Set 1: 6321C - A, 200KG/drum, 6321C - B, 200KG/drum;
Every set: 2 drums A and 1 drum B, 600KG/1 set.
Set 2: 6321C - A, 25KG/pail, 6321C - B, 25KG/pail.

 

 

6321C EPOXY Electrical Potting Compound for Hollow fiber membrane modules 26321C EPOXY Electrical Potting Compound for Hollow fiber membrane modules 3

Want to Know more details about this product
I am interested in 6321C EPOXY Electrical Potting Compound for Hollow fiber membrane modules could you send me more details such as type, size, quantity, material, etc.
Thanks!
Waiting for your reply.