9765 RTV high performance adhesive sealing silicone is single component, white / grey like dealcoholized, flame retardant heat conductive RTV silicone. Cured adhesive for elastomers; release alcohols after curing, non - corrosive to most metals; small molecular content less than 300ppm; has excellent weather resistance, adhesion properties of wet resistance, excellent heat resistance, has better adhesion to most metal and plastic, ceramic and glass.
Mechanical bonding of TV, CRT, power supply, communications equipment and other electronic, electrical components of the sealing and bonding electronic components fixed etc. The sealing adhesive other flame retardant heat requirements of metal, plastic, glass, etc.
Characteristics before curing
Density (g/cm 3) (GB/T13477-2002) 1.05
The base material of chemical types: Polysiloxane
Characteristics after curing
Color reddish white solid
Tensile strength (MPa) 2.5
Elongation at break (%) 40
Hardness (shore A) 60
Shear strength (MPa) 2.5
Volume resistivity (omega.Cm) 1 x 1015
|Component of Basic Materials||Polysiloxane|
|Characteristics after curing|
|Color||reddish white solid|
|The loss factor||(100H)||0.07|
|Full Curing Time||Hour||24|
|Tensile Strength||After Curing||Mpa||2.5|
|water absorption (24h,25℃)||(%)||1.8|
|Elongation at break (%)||(%)||40|
|Volume resistivity||(omega.Cm)||1 x 1015|
Direction for use
Clean the surface: surface adhesive objects are applied to clean, remove the rust, dust and oil etc.
Gluing: glue squeeze onto the surface has cleaned.
Curing: the parts are arranged in the air gluing, when after the formation of epidermis, it is from the surface to the internal curing process. At 25 degrees C and 55% relative humidity curing degree under 24 hours, glue curing depth is 2 ~ 4mm, prolonging the curing time, gradually increase the depth of.
Storage: unused plastic blocks should be tightened immediately sealed and stored in or stored in the device the pressure plate, the glue outlet liquid seal in oil in sealed again, remove the glue outlet of a small amount of crust can be, does not affect the normal use. Glue in the storage process, the nozzle may also appear a small amount of curing phenomenon will be clear after normal use, does not affect the product performance.
Matters need attention
Keep it away from children. Ø
Use it in ventilated places
In case of contact with skins, wipe and then flush with clear water.
In case of contact with eyes, flush with clear water immediately and go to hospital for checking.