7401 Medium Viscosity Cyanoacrylate Adhesives , surface insensitive cyanoacrylate Glue

7401 cyanoacrylate adhesive Is a single component, medium viscosity, surface insensitive cyanoacrylate.

Typical Applications

Suitable porous, acid and absorbent inert materials, difficult sticky materials fast, high-strength adhesive

Before solidification characteristics

Typical values range

Appearance colorless transparent liquid

Base material chemical composition α- cyano-acrylate

Viscosity (mPa.s)

(GB / T2794-1995)

Brookfield RVT

2 # rotor 20 rpm 100-300

Density (g / cm3) 1.06

(GB / T13354-1992)

Flash Point (℃) 80 ~ 93

(SH / T0733-2004)

Gap fill (mm) 0.15

Fixed time (s)

Steel 20-45

Aluminum 2-10

ABS 1 ~ 5

Polycarbonate 5-10

After curing characteristics

Full cure time at room temperature (h) 24

Tensile shear strength (MPa)

(GB / T 7124-1986)

Steel 14 ~ 23

Al 2 to 11

ABS 7 ~ 15

7 to 15 Polycarbonate

Working temperature (℃) -54-80

Chemical / solvent resistance

Solvent Temperature (℃) have left initial strength ratio (%)

100h 500h 1000h

Oil 40100100100

Leaded gasoline 23100100100

Ethanol 23100100100

Isopropanol 23100100100

Ethylene glycol: water 23 100 100 100

(1: 1)

Hot / wet 95% 40,827,675

Instructions

In order to achieve the best bonding effect, is the surface to be cleaned before the adhesive stick back to the days 7755 recommended to improve the cleaning effect of the cleaning agent to remove oil, impurities and dried. Try to expose a fresh surface grinding. Glue evenly applied to be part of sticky, immediately close the alignment, plus beat together. Excess glue before curing can not dissolve with acetone or ethyl acetate, to clean up.

This product is the best adhesive gap is less than 0.05mm effect.

To ensure the system to achieve optimal bonding strength, and the best layer resistance to media performance, it is recommended curing time in more than 24 hours to ensure complete curing adhesive layer.

Attention

Store away from children.

This product contains α- ethyl cyanoacrylate, the eyes have a stimulating effect on the skin. Recommended for use in a well-ventilated place.

In case of contact with eyes and skin, immediately rinse with water.

Product safety information, please refer to the product MSDS.

packing specification

ordering no.:740101,20g/bottles,10bottles/box

Storage condition

Best stored at 3-8 ℃ cool dry place.

Storage period of 12 months.