Introduction of 720
720A in combination with Hardener 720B is a two-component polyurerurethane adhesive for various film/film and film/foil laminates.
The product has the characteristics of high initial adhesion, high peeling strength, good transparency, and can effectively prevent the phenomenon of the tunnel.
Properties
1. List of dilution: When the ethyl acetate is used for dilution, to obtain an accurate solid content, it is required to refer to the following solvents
720 A | 720B | Solvent | Solids Content | Viscosity |
20KG | 3KG | 18.6KG | 40% | 20-25s |
20KG | 3KG | 24.6KG | 35% | 13-20s |
20KG | 3KG | 32.5KG | 30% | 12-15s |
20KG | 3KG | 43.6KG | 25% | 10-15s |
* Viscosity is based on the average viscosity of the Zahn cup 3#/25°C
2. Pot life: The ready-for-use adhesive in closed containers has a working time of about 8 hours. The composite machine is not used up of adhesive, the retention time of more than 2 hours, if more than 2 hours should be abandoned, otherwise it may lead to unstable composite films.
Tropical area (Temperature >28°C + humidity >60%) pot life: Mixed good adhesive should be used up within 2 hours.
3. Application weight: Depending on the film or foil combination and the end use of the laminate, the adhesive weight may above 1.8g/m2 dry. For printed laminates the weight has to be adjusted accordingly.
4. Packaging specifications
8720A:20KG/bucket
8720B:3KG/bucket
5. Others: Film additives-particularly slip agent content in LDPE,MDPE and CPP films-packed goods, printing inks, pre-treatment and coating of films are of significant importance to the end use of the laminates and may affect the performance properties either straight away or later. Therefore, practical laminating tests as well as checks on the laminates are necessary before going into full scale production.
Statement
The information provided herein, especially recommendations for the usage and the application of our products, is based upon our knowledge and experience. Due to different materials used as well as to varying working conditions beyond our control we strictly recommend to carry out intensive trials to test the suitability of our products with regard to the required processes and applications. We do not accept any liability with regard to the above information or with regard to any verbal recommendation, except for cases where we are liable of gross negligence or false intention.
Introduction of Huitian
Established in 1977, Huitian is now one of the biggest adhesive manufacturers in China. There are four manufacturing bases in total, providing high performance adhesives for different industries.
Huitian has two fully automatic productions lines and the capacity is 24,000MT/Year just for flexibile packaging adhesives.
Huitian's products has been well received by domestic and international end users
Besides construction adhesives, Huitian also provides many others kinds of products for different industries, transportation, electronics, photovaltaic, etc.
Huitian is your reliable partner and satisfy your need of adhesives!