 |
Out door LED Screen Potting silicone potting compound electronics 4120Z
Product Details:
| Place of Origin: | CHINA |
| Brand Name: | HUITIAN |
| Certification: | SGS |
| Model Number: | 4120Z |
Payment & Shipping Terms:
| Minimum Order Quantity: | 500KG |
|---|---|
| Price: | Negotiation |
| Packaging Details: | 22kg/set: A: 20kg /bucket, B: 2kg/bucket. |
| Delivery Time: | 15 days |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 10000KG MONTH |
|
Detail Information |
|||
| Color COMPONENT A: | BLACK | Color Component B: | Translucent |
|---|---|---|---|
| Component Of Basic Materials: | Polysiloxane | Density Of A Component: | 1.16 |
| Density Of B Component: | 0.98 | Viscosity: | 2200 |
| Mix Ratio By Weight (A:B): | 10:1 | Handing Curing Time: | 55 Mins |
| Initial Curing Time: | 3 Hours | Tensile Strength: | 0.6 Mpa |
| Elongation At Break: | 160% | Hardness: | Shore A 20 |
| Work Temperature: | -60-200 | ||
| Highlight: | Silicone Potting Compound,potting electronic components |
||
Product Description
Out door LED Screen Potting silicone 4120Z
● Product Features:
Ø Double component, condensation type.
| Item | Unit | Typical Value | ||
| Color | Component A | Black | ||
| Component B | Translucent | |||
| Component of Basic Materials | Polysiloxane | |||
| Density | Component A | g/cm3 | 1.15 | |
| Component B | 0.98 | |||
| Viscosity | Component A | mPa*s | 2000 | |
| Component B | 15 | |||
| After Mixed | 1800 | |||
| Mix Ratio by weight (A:B) | 10:1 | |||
| Handing Curing Time | min | 40 | ||
| Initial Curing Time | hour | 3 | ||
| Full Curing Time | hour | 24 | ||
| Tensile Strength | After Curing | Mpa | 0.6 | |
| Elongation at break | % | 160 | ||
| Harness | Shore A | 20 | ||
| Volume Resistivity | Ω*cm | 1x1015 | ||
| Dielectric Strength | KV/mm | 25 | ||
| Flame Retardant Rating | UL94 V-1 | |||
| Work Temperature | ℃ | -60~200 | ||
Ø Room temperature curing.
Ø Ethyl alcohol released after curing, non-corrosive to electronic components
Ø High adhesion to all electronic components except for those made of PP&PE.
Ø High performance on insulation, damp proofing, vibration resistance, chemical resistance, electricleakage resistance.
Ø No need to add primer coating before use
Ø High & low temperature resistant
Ø Flame retardant rating:UL94 V-1
● Main Applications:
Ø For the deep potting of power supply and electronic components and parts.
Ø Especially suitable for the potting of inside and outside LED displays that request for flame resistant
● How to Use
Ø Before use, stir component A by hand or machine properly, keep component B sealed in the can and cut a proper hole at the sharp mouth of cartridge.
Ø Check whether it’s adhering to Applied Materials theoretically.
Ø Mix component A and B with the mix ratio A: B=10:1 by weight. Before hand simple tests are requested if you need to change the mix ratio.
Ø Vacuum deforming is not necessary if the potting thickness is below 5mm, but it is requested if the thickness is more than 5mm.
Ø Heating curing is unsuited, or pinholes and blisters will occur.
Ø Long-term exposure of component B in the air is unsuited.
● Technical Data
● Packing:
Ø 22kg/set: A: 20kg/bucket, B: 2kg/bucket.
● Storage:
Ø Keep it away from children.
Ø Use it in ventilated places
Ø In case of contact with skins, wipe and then flush with clear water.
Ø In case of contact with eyes, flush with clear water immediately and go to hospital for checking.
Ø Store it in dry and shady places at the temperature of 8~28℃
Ø Storage life: Component A is 12 months; Component B is 6 months since the date of manufacture.
