Polyurethane One Component Molding Windshield Glass Glue Rubber Trim Adhesive

Huitian 917 windshield, windscreen, glass sealant, polyurethane pu sealant

Typical Application
Seam for filling the bus interior, locomotive, ship,container, cold storage and other parts.

Instructions for using
Surface cleaning: clean surface: remove the rust, dirt,water and oil etc..

Size:

cut a small hole in the beak suitable rubber barrel, glue mouth diameter should be considered sizing width and decide, into the glue gun start sizing operation.

Cure:

a large temperature and humidity environment on polyurethane adhesive surface drying and curing effect, low temperature, curing slow; temperature and humidity is too high, dry too fast.

The best operating condition
environmental conditions: temperature 20 to 30 DEG C for 50 ~ 70%RH, humidity exceeds 5 to 35 DEG C; the temperature, humidity 35 ~ 75%RH range please careful construction.Polyurethane adhesive in sizing and curing process, avoid contact with chemicals containing hydroxyl, amino and,this kind of material will cause the polyurethane glue curing incomplete.

Storage:

unused plastic blocks should be tightened immediately, to seal the tube mouth save. Again, if sealed,a little crust, remove immediately after, does not affect the normal use. In the process of storage, the nozzle may also appear a few crusts, remove after normal use, does not affect the product performance.

Note
Keep away from children.
If you accidentally come in contact with the skin, wipe in the curing a cloth before class, and using alcohol solvent scrubbing.
If the case of contact with eyes, rinse immediately with water, and medical treatment.
Recommended for use in a well ventilated placeProduct safety data please refer to the product MSDS.

Package
300ml/Catridge,24Catridese/Carton

Storage
Store in cool and dry place 5-25 C
Storage period: Catridges for 9 months
Sausage 6 months