Black Power-seal Gasket Maker, RTV silicone sealant, 55g/pic.for autos repair
Structural silicone
sealant |
1.One-part, high flexibility, neutral cure suitable for use on most construction materials.
2.Excellent adhesion to most construction materials without primer.
3.High Modulus after cured, extension/compression movement capability of up to ±25%
of the original joint width |
Neutral/ Waterproof
silicone sealant |
1.use and extrude easily in the application of sealing, assembling, waterproofing
hardware products, and hardware products, and have long-term durability .
2.One-part, medial modulus, neutral cure, ultra clear, and non-corrosive to sensitive
substrates.
3.Excellent adhesion to stone, ceramics, concrete, and other building materials.
4.No pollution to porous materials. |
Acetoxy Silicone
Sealant |
1.One-part, easy to apply.
2.No seasonal limited use.
3.Suitable for sealing, repairing, and other metal frameworks bonding.
4.Outstanding weatherproofing ability, with service life of ten of years. |
Black Power-seal sealr after contact with moisture-cured to form a silicone rubber gasket having flexibility. The product has anti-aging, weathering, heat, will not harden, shrink or crack and other properties. It is mainly used engine oil pan, transmission gear cover, axles and other parts of the bonding and sealing. This product is suitable for a temperature range of -60 ℃ ~ 260℃
Typical Usage
This product is not binding limit the size and shape of the face, can replace a variety of rubber, asbestos mat, cork pad and paper pad, to the flange of the automobile, motorcycle engines, gear boxes, axles and various machinery and equipment combined with the implementation of the sealing surface.
Technical Data
| Properties before Curing |
| Typical Value |
Limits |
| Density(25℃),g/㎝3 |
1.4～1.6 |
| Viscosity’s |
5～15 |
| Mobility, mm； |
≤10 |
| 3min,25℃ |
| Odor |
No odor |
| Dry Time, min: |
10~30min |
| (Curing Condition: temperature 25℃,50±5%RH) |
| Properties after Curing |
| Tensile Strength, N/mm2 |
≥1.0 |
| Tensile Strength, % |
150～300 |
| Hardness shore A |
30～45 |
How to Use:
1. with cotton and organic solvent to be sealed remove surface oil and impurities.
2. the plastic tube in a suitable whole cut beak, with the glue gun glue to end faces to be sealed, and allowed to form a continuous plastic ring.
3. close two seal faces and secured with bolts.
4. one hour early solid, at 25 ℃, 50% humidity, fully cured within 24 hours. In cooler or dry conditions takes a long time to cure.
5. sealed hose sealant remaining can be used until the next one.
Storage:
Storage In a cool dry place for one year.
Packaging
55g/pc, 100pcs/carton
Your message must be between 20-3,000 characters!
