1.38g/Cc High Temp Rtv Sealant Single Component Moisture Cured
|Place of Origin:||Hubei, China|
|Model Number:||Grey 588|
Payment & Shipping Terms:
|Minimum Order Quantity:||1800 Units|
|Packaging Details:||55g/pack, 100pcs/carton 90g/pack, 80packs/carton|
|Delivery Time:||10-25 days|
|Color:||Black/Red/Grey/Siliver||Hardness:||Shore A 38|
|Tack-free Time:||18 Mins|
1.38g/cc high temp rtv sealant,
single component high temp rtv sealant,
1.38g/cc high temperature gasket maker
Black , red and Grey Gasket Maker Sealant RTV Silicone Adhesives for auto general repair
1.This is a single-component cyanoacrylate monomer in th eliquid state capable of etremely rapid polymerization between adherent surfaces,resulting in extremeliy strong and structural bonds at room temperature.
2.This instant adhesive will,with only normal surface prepa ration,bond all materials commonly used in the engineering industry,except polyethylene,polyproplene,Teflon ,and very porous surfaces,which require special treatment.
Grey Power-seal RTV gasket makers back after contact with moisture-cured to form a silicone rubber gasket having flexibility. The product has anti-aging, weathering, heat, will not harden, shrink or crack and other properties. It is mainly used engine oil pan, transmission gear cover, axles and other parts of the bonding and sealing. This product is suitable for a temperature range of -60 ℃ ~ 300 ℃
This product is not binding limit the size and shape of the face, can replace a variety of rubber, asbestos mat, cork pad and paper pad, to the flange of the automobile, motorcycle engines, gear boxes, axles and various machinery and equipment combined with the implementation of the sealing surface.
|Properties before Curing|
Tack-free Time, min:
(Curing Condition: temperature 25℃,50±5%RH)
|Properties after Curing|
|Tensile Strength, N/mm2||1.25||≥1.0|
|Tensile Strength, %||240||150～300|
|Hardness sh A||35||30～40|
How to Use:
1. with cotton and organic solvent to be sealed remove surface oil and impurities.
2. the plastic tube in a suitable whole cut beak, with the glue gun glue to end faces to be sealed, and allowed to form a continuous plastic ring.
3.close two seal faces and secured with bolts.
4. one hour early solid, at 25 ℃, 50% humidity, fully cured within 24 hours. In cooler or dry conditions takes a long time to cure.
5. sealed hose sealant remaining can be used until the next one.
Storage In a cool dry place for one year.