Black silicone sealants, gasket maker, used for cars' repair and engineers' repair
Features:
1: factory direct
2: 10years experience,
3: competitive price,
4: high quality,
5: more reques be available.
Warnings:
1. Bonds skin and eyes in seconds
2. Keep out of reach of children
3. If bonding occurs do not pull skin apart
4. Irritating to the eyes,respiratory system and skin,In case of contact with eyes,rinse immediately with plenty of water and seek medical advice, After contact with skin,wash immediately with plenty of warm water
Typical Usage
This product is not binding limit the size and shape of the face, can replace a variety of rubber, asbestos mat, cork pad, and paper pad, to the flange of the automobile, motorcycle engines, gear boxes, axles and various machinery and equipment combined with the implementation of the sealing surface.
Technical Data
| Properties before Curing |
| |
Typical Value |
Limits |
| Density(25℃),g/cc |
1.45 |
1.4～1.6 |
| Viscosity’s |
18 |
10～30 |
|
Mobility, mm；
3min,25℃
|
8 |
≤10 |
| Odor |
|
No odor |
|
Tack-free Time, min:
(Curing Condition: temperature 25℃,50±5%RH)
|
15 |
10~30min |
| Properties after Curing |
| Tensile Strength, N/mm2 |
1.25 |
≥1.0 |
| Tensile Strength, % |
240 |
150～300 |
| Hardness sh A |
35 |
30～40 |
How to Use:
1.with cotton and organic solvent to be sealed remove surface oil and impurities.
2.the plastic tube in a suitable whole cut beak, with the glue gun glue to end faces to be sealed, and allowed to form a continuous plastic ring.
3.close two seal faces and secured with bolts.
4.one hour early solid, at 25 ℃, 50% humidity, fully cured within 24 hours. In cooler or dry conditions takes a long time to cure.
5.sealed hose sealant remaining can be used until the next one.
Storage:
Storage In a cool dry place for one year.
Packaging
55g/pack, 100pcs/carton
95g/pack, 80packs/carton
Your message must be between 20-3,000 characters!
