RTV 7595 silicone sealants, weather resistance, used for flange joint surface seal
1. Clean the thread surface, eliminate greasy dirt and dry it.
2. Squeeze a certain amount of glue into one of plane, form a continuous glue line, girding the parts to
sealing. Suggest to pneumatic pressure no more than 0.4 MPa.
3. Fold and seal two surfaces with bolts; initial curing within an hour, at 25 ℃, 50% humidity, completely cured in 24 hours. In cold or dry condition needs much longer time to cure.
4. If the glue not use up, please tight blocks and sealed nozzle immediately. If there is a little crust in the
mouth of tube, remove it, it will not affect the normal use.
310ml/cartridge, 30 cartridges/ carton
This product must be stored far away from children.
If you carelessly touch eyes and skin, please wash it with water immediately.
Stored in 8～28℃ cool and dry place. Shelf life is 12 months.