9060S black silicone for cure and durable adhesion to a variety of substrates without primer.
9060S (former model No. was 906S) is a black, slightly slump silicone adhesive / sealant designed for applications where non-corrosive cure and durable adhesion to a variety of substrates without primer.
One component adhesive/sealant
Cures at room temperature when exposed to moisture in the air
Oxime cure system
Excellent dielectric properties
Stable and flexible form -60℃ to +250℃
Product safety information required for safe use is not included. Before handing, read product and safety data sheets and container labels for safe use, physical and health hazard information
When stored at 8- 28℃ in the original unopened containers, this product has a usable life of 9 months from the date of
Special precautions must be taken to prevent moisture from contacting this material.Containers should be kept tightly
Sealing and bonding applications where non-corrosive cure is required.
Applicable to adhesive/seal of general industrial assembly.
Property Standard Unit Typical value
Color / / Black
Appearance / / Slightly slump
Density(25℃) GB/T 13354-1992 g/ml 1.25
GB/T13477.5-2002 min 20
Hardness GB/T 2411-2008 Shore A 30
Elongation GB/T 528-2009 % 300
Tensile strength GB/T 528-2009 MPa 1.30
Shear bond strength
GB/T 13936-1992 MPa 1.20
Temperature range / ℃ -60℃-+250℃
Volumeresistivity GB/T1692-2008 Ω·cm 1×1014
Dielectricstrength GB/T1695-2005 kV/mm 18