1.Product identification
Product Name: HT-6202T two-component epoxy potting adhesive
Manufacturer / supplier: Shanghai Huitian new material Co., Ltd.
Address:No. 251 Wenji Road Songjiang Shanghai China(Post Code: 201600)
Telephone:021-57743399
2．Components / component information
Chemical name CAS# %(Weight ratio)
A Components
DGEBAEpoxy resin 25068-38-6 25-35
Diluent / 5-10
Silicon powder / 60-70
B Component
Modified anhydride / 70-80
Accelerator / 1
3．Risk overview
Risk classification: non hazardous chemicals
Skin contact: may cause irritation and allergic reactions.
Eye contact: may cause irritation.
Inhalation: Stream produced by heating may make irritation to the respiratory tract. In the room tempreture, adhesive excluding volatile matter, No inhalation hazard.
Ingestion: ingestion of harmful
4. First aid measures
Skin contact: take off contaminated clothing, immediately wash with water and soap.
Eye contact: rinse with water. And asap go to hospital.
Inhalation: from exposure to fresh air. If necessary go to hospital.
Ingestion: generally does not require treatment, taking large amount should be hospitalized.
5．Fire protection measures
Flash point: not determined,>130℃.
Fire extinguishing agent: water spray, foam, dry powder, carbon dioxide.
Special fire protection measures: to prevent inhalation of smoke. Wear positive pressure self-contained breathing apparatus. Water can reduce the smoke density.
Hazardous combustion products: COx, and other organic matter.
Combustion limit: no data.
6．Leak emergency measures
Don't touch the skin. As far as possible leakage glue clean. Use solvents or soapy water to clean the residue. Waste is placed in an appropriate container, processing according to local laws and regulations.
7．Job handling and storage
Handling: Do not contact with skin and eyes.
Storage: This product should be stored in low temperature shade. Keep away from fire and heat source.
8．Controls / personal protection contact
Ventilation: the conventional mechanical ventilation.
Occupation contact limiting value
Silicone rubber: not specified
Eye protection: protective glasses or safety glasses.
Hand protection: rubber or plastic gloves.
Respiratory protection: generally do not need, using certified respirator when necessary.
9．Physical and chemical properties
Traits: grey fluid colloid.
Boiling point: no data
Solubility: insoluble in water, soluble in hydrocarbon solvents.
Relative density (=1): 1.6-1.8
Vapor density: no data
10．Stability and reactivity
Chemical stability: stable under normal conditions.
Conditions to avoid: This product and the curing agent reacts.
Incompatible materials: strong oxidant, strong acid, strong alkali.
Hazardous decomposition products (non thermal): No.
Hazardous polymerization: generally does not occur.
11．Toxicological information
Acute toxicity (epoxy resin):
The rats by LD50:11400 mg/kg.
Rabbit percutaneous LD50:> 20 ml/kg.
Carcinogenicity: not included in the IARC list of carcinogens.
Allergic: can cause skin allergies.
12．Ecological information
No data
13．Disposition
Waste disposal instructions: to comply with local environmental regulations
14．Transport
Domestic (CN-GB), International (IMO, IATA, UN) were not specified. Non dangerous goods.
Your message must be between 20-3,000 characters!
