● Product Features:
Ø Single component, white color.
Ø Physical form: paste
Ø Made of metallic oxide and polysiloxane
Ø Wide operating temperature range
Ø Nontoxic, non-corrosive
Ø Eco-friendly, odorless
Ø Doesn’t go dry and flowing at high temperature.
Ø High performance on insulation, damp proofing, corona resistance, electric leakage resistance and chemical resistance.
Ø Can be dispensed both by hand or machine.
Ø Heat conductivity coefficient: 2.1W/(m·K)
● Technical Data:
| Item |
Unit |
Typical Value |
| Item No. |
|
0113 |
| Physical Form |
|
paste |
| Color |
|
white |
| Main Component |
|
polysiloxane |
| Density |
g/cm3 |
2.9 |
| Penetration Degree |
1/10cm |
280 |
| Volatility(200℃,24h) |
% |
0.2 |
| Volume Resistivity |
Ω*cm |
1.0×1015 |
| Dielectric Strength |
KV/mm |
24 |
| Breakdown Voltage |
KV/mm |
20 |
| Surface Resistance |
Ω |
2.4×1014 |
| 0.1mm Thermal Resistance |
m2K/W |
0.00011 |
| Work Temperature |
℃ |
-50~200 |
| Heat Conductivity Coefficient |
W/(m·K) |
2.1 |
● Main Applications:
Ø Widely used for the thermal conductivity of electronic components including the filling of gap between CPU and heat sink.
Ø For the filling of gap between high-power audion, thyrister and basic materials such as copper and aluminum to reduce the temperature of electronic components.
● How to Use
Ø Stir this product before using if it’s long time unused.
Ø Clean the object surfaces to get rid of oil and dirty before use.
Ø The object surfaces should be even and uniform.
Ø To dispense smoothly, please stir for 2 minutes before use.
Ø Apply a little for try before massive use.
Ø Only a thin layer of this product needed for use to avoid wastes.
Ø Do not keep this product exposed in the air for a long time.
● Packing:
Ø 2kg/bucket, 6bukets/carton
Your message must be between 20-3,000 characters!
