● Product Features:
Ø Single component, grey color.
Ø Physical form: paste
Ø Made of metallic oxide and polysiloxane
Ø Wide operating temperature range
Ø Nontoxic, non-corrosive
Ø Eco-friendly, odorless
Ø Its stability and thermal conductivity kept even at the temperature of 150℃
Ø Doesn’t go dry and flowing at high temperature.
Ø Suitable for dispensing by hand
Ø Heat conductivity coefficient: 2.6W/(m·K)
● Technical Data:
Item | Unit | Typical Value |
Item No. | 0114 | |
Physical Form | paste | |
Color | grey | |
Main Component | polysiloxane | |
Density | g/cm3 | 2.5 |
Penetration Degree | 1/10cm | 290 |
Volatility(200℃,24h) | % | 0.2 |
Volume Resistivity | Ω*cm | 1.0×1015 |
Dielectric Strength | KV/mm | 22 |
Breakdown Voltage | KV/mm | 18 |
Surface Resistance | Ω | 1.6×1012 |
0.1mm Thermal Resistance | m2K/W | 0.00007 |
Heat Conductivity Coefficient | W/(m·K) | 2.6 |
● Main Applications:
Ø Widely used for the thermal conductivity of electronic components including the filling of gap between CPU, BGA, LED, power source, high-power audion, thyrister and basic materials such as copper and aluminum to reduce the temperature of electronic components.
● How to Use
Ø Stir this product before using if it’s long time unused.
Ø Clean the object surfaces to get rid of oil and dirty before use.
Ø The object surfaces should be even and uniform.
Ø To dispense smoothly, please stir for 2 minutes before use.
Ø Apply a little for try before massive use.
Ø Only a thin layer of this product needed for use to avoid wastes.
Ø Do not keep this product exposed in the air for a long time.
● Packing:
Ø 1kg/bucket, 12bukets/carton