One component 3950 UV adhesive light green , medium high viscosity UV curing LCD pin clip PIN adhesive
|Place of Origin:||China|
Payment & Shipping Terms:
|Minimum Order Quantity:||1000kg|
|Packaging Details:||250g/tube, 10 tubes/Carton|
|Viscosity:||8500-12500 MPa.s||Shelf Life:||12 Months|
|Work Temperature:||-50-150℃||Composition:||Modified Acrylate|
Silicone Potting Compound,
potting compound for electronic components
3950 UV curable adhesive is one component of light green, medium high viscosity, high performance UV curing LCD pin clip PIN adhesive. Excellent adhesion and weather resistance, excellent cold and hot impact resistance, no corrosion on the ITO glass
|Component of Basic Materials||Modified acrylate|
|Curing energy (mj/cm2)||800|
|Handing Curing Time||min|
|Initial Curing Time||hour|
|Full Curing Time||second||40|
|Tensile Strength||After Curing||Mpa||0|
|water absorption (24h,25℃)||(%)||1.80|
|glass state temperature||(℃)||80|
|Stainless steel /PP drawing strength||Kg||5.8|
Bonding the LCD pin clip PIN.
Direction for use
The glued material surface should be dry, no oil.
When applied to the adhesive curing light intensity is not lower than 40mW/cm2, was applied to the surface coating time strength of not less than 100mW/cm2.
Matters need attention
Keep it away from children. Ø
Use it in ventilated places
In case of contact with skins, wipe and then flush with clear water.
In case of contact with eyes, flush with clear water immediately and go to hospital for checking.
1kg/Bucket, 12 Bucket/Carton
Store it in dry and shady places at the temperature of 10~26℃
Storage period is 12 month