Brand List
Black Sealant , RTV silicone sealant for autos repair,55g/pc,110g/pc, Gasket Maker Sealant
Black Sealant , RTV silicone sealant for autos repair,55g/pc,110g/pc, Gasket Maker Sealant
5299W-S TDS.PDF
Black Power-seal sealr after contact with moisture-cured to form a silicone rubber gasket having flexibility. The product has anti-aging,weathering, heat,will not har den, shrink or crack and other properties. It is mainly used engine oil pan, transmission gear cover, axles and other parts of the bonding and sealing. This product is suitable for a temperature range of -60 ℃ ~ 260℃
Typical Usage
This product is not binding limit the size and shape of the face, can replace a variety of rubber, asbestos mat, cork pad and paper pad, to the flange of the automobile, motorcycle engines, gear boxes, axles and various machinery and equipment combined with the implementation of the sealing surface.
Technical Data
Properties before Curing
Typical Value
Limits
Density(25℃),g/㎝3
1.4~1.6
Viscosity’s
5~15
Mobility, mm;
3min,25℃
≤10
Odor
No odor
Dry Time, min:
(Curing Condition: temperature 25℃,50±5%RH)
10~30min
Properties after Curing
Tensile Strength, N/mm2
≥1.0
Tensile Strength, %
150~300
Hardness shore A
30~45
How to Use:
1, with cotton and organic solvent to be sealed remove surface oil and impurities.
2, the plastic tube in a suitable whole cut beak, with the glue gun glue to end faces to be sealed, and allowed to form a continuous plastic ring.
3 close two seal faces and secured with bolts.
4, one hour early solid, at 25 ℃, 50% humidity, fully cured within 24 hours. In cooler or dry conditions takes a long time to cure.
5, sealed hose sealant remaining can be used until the next one.
Storage:
Storage In a cool dry place for one year.
Packaging
55g/pc, 100pcs/carton
Weatherproof Neutral Silicone Sealant For Doors And Windows 300ml
9335 Factory supply weather proof Neutral silicone sealant for doors and windows 300ml/ 590ml
Introduction of 9335
9335 is general silicone building sealant dedicated used to the doors and windows, interior and exterior caulking seal, have good adhesion for a variety of doors, windows and building substrates, but also be suitable for general sealing, including glass, tile, concrete, brick stone, aluminum, etc., one-component, neutral curing, non-corrosive substrate.
Feature
1. One-component, neutral curing
2. Good extrusion property and thixotropy
3. Good adhesion, can bond most kinds of materials
4. Excellent weather resistance, reliable long-life
5. Protect environment, non-corrosive, non-irritating odor
Technical Properties
Test Item
Neutral Silicone sealant 9335
Sag,mm
0
Extrusion property ml/min
441
Tack free time, hour
0.3
Tensile strength, Mpa
0.46
Elongation properties after water-UV light
No damage
Elongation properties after hot air - circulation
No damage
Low temperature flexibility, -10℃
Qualified
Elastic recovery rate after hot air - circulation ,%
No less than 80
Tension- compression / Durability degree
7010
Crcling performance / Bong damage area, %
0
Packing
300ml/Cartridge, 590ml/ Sausage
Color
Costomizable
Standard
JCT/485 (based on ISO13640:1999
JIS A 1439, ASTM D 2377, ASTM C 794)
Technical Properties
Application
1. Any kind of door and window installation
2. Glass assembly
3. Window water-proof sealing
User Guide:
1, The substrate surface must be clean and free of oil and dust.
2, Operation temperature 5-40 ℃
3, This product is neutral curing, non corrosive to substrate.
4, Not for leaking grease, plasticizers or solvents occasion.
5, Because of the silicone sealant needs to absorb moisture in the air for curing, not good for an airtight case.
Storage Condition
Below 25 ℃ cool dry and ventilated place, avoid high temperature
Shelf life: 9 month stored in cool and dry place. (+5 ℃-25 ℃).
Introduction of Huitian
Established in 1977, Huitian is now one of the biggest adhesive manufacturers in China. There are five manufacturing bases in total, providing high performance adhesives for different industries.
Huitian is a total adhesive solution provider for construction industry, including products for curtain wall, stones, insulating glass, doors and windows.
Huitian has a fully automatic production line for construction adhesives and the capacity can reach 15,000MT/Year.
Huitian's construction adhesives have been widely used in big construction projects and are well reviewed.
Besides construction adhesives, Huitian also provides many others kinds of products for different industries,transpotation,electronics,photovaltaic,etc.
Huitian is your reliable partner and satisfy your need of adhesives!
1428 Industrial Adhesive Glue Structural Acrylic Bonding Adhesive For Glass Steel
1428 High performance structural bonding acrylic adhesive
Two component, blue, rigid, super fast curing methyl acrylic acid adhesive.Suitable for plastic, metal and composite adhesive, high viscosity, high thixotropic, not vertical flow, Mixing ratio 10:1, Operation time 3-4 minutes, strength: 75%. Especially suitable for bonding of composite materials, without surface treatment can reach the highest strength, good toughness, good shock resistance, fatigue resistance. Meet the demand of mass production line.
Typical Applications
Transport vehicles, notebook computer, mobile phone and other products such as structural adhesive bonding electrons.
Bonding material: ABS, glass steel, polyester (DCPD modified) polystyrene, polyethylene ester, PVC, polyurethane, coating
Carbon steel, aluminum and stainless steel recommended HuiTian primer 1020.
Technical Data
Item
Unit
Typical Value
Color
Component A
White
Component B
Blue
C omponent of Basic Materials
acrylic acid
Density
Component A
g/cm 3
0.97
Component B
1.13
Viscosity
Component A
mPa*s
120000
Component B
150000
After Mixed
Mix Ratio by weight (A:B)
10:1
Handing Curing Time
Min
6
Initial Curing Time
Hour
0.5
Full Curing Time
Hour
24
Tensile Strength
After Curing
Mpa
20
Elongation at break
%
Hardness
Shore A
Volume Resistivity
Ω*cm
Dielectric Strength
KV/mm
Flame Retardant Rating
UL94 V-1
Work Temperature
℃
-55~121
Medium resistance
Resistance PH 3-10 acid, hydrocarbons, salt solution. Not resistant to polar solvent, acid and alkali.
How to use
Surface treatment: Remove dust, water, oil from surface; maintain the adhesive surface clean, carbon steel, aluminum and stainless steel recommended Huitian primer to reach 1020 best bonding results.
Gluing:
This product at 18 ℃ -27 ℃ environment construction to achieve the most ideal curing effect, below 18 ℃ curing slower, more than 27 ℃ curing faster. Effects of A and B components of the viscosity is affected by temperature, in order to ensure the measurement / consistent, effect of mixing equipment, the two components in the storage temperature to maintain a constant.
Gluing work must finish in operation time. Operation before the end of time, glue and positioning of the work piece to accurately completed, then keep the work piece in a fixed state until the end to remove positioning time.
Clean:
Before curing is easier to clean, wipe the lotion, overflow adhesive residue available containing citric acid, terpene resin or NMP degreasing agent scrub in order to achieve the best results. If the layer has been cured, carefully will layer off, and wipe the lotion good cleaning effect.
Package
50ml/ Double tube, 12 double tube /carton.
MS7930 MS Polymer Sealant For Construction Environmental Protection
MS7930 MS polymer sealant for construction, sealing and bonding in housing area, environmental protection
7930(HT9301MS) MS sealant is a silicon alkyl terminated polyether as a main component, low viscosity, general type of one component moisture curable sealant.
Curing material combines the advantages of polyurethane and silicone adhesive sealant products.
Typical use
Preliminary fixed the sealing of joints, such as weld seam sealing, etc.
Wide Application
Characteristics before curing
Color:
white/Black/Grey
Base material:
Silane modified polyether
Density (g/cm3):
1.38g/cc
Tack free time (min):
20minutes
Pressure flow viscosity(s/10g):
6
Characteristics after curing
Room temperature vulcanized depth
(mm/24h)
3
Tensile strength(MPa)
(GB/T528-1998)
1.2
elongation at break (%)
(GB/T528-1998)
450
Hardness(ShA)
(GB/T531-1999)
30
Work temperature(℃)
-40~100
Short use temperature(℃)
120
Instructions for use
Clean :Clean the surface: remove the rust, dust and oil etc...
Gluing: The nozzle sleeve cut, take the glue mouth, cut into appropriate slope,
using squeeze can glue gun is coated onto the construction site;
pneumatic pressure recommended that no more than 0.4MPa sizing.
Curing : The parts are arranged in the air sizing, when after the formation of epidermis,
from the surface to the interior of a room temperature curing, and 55% relative humidity at 24 hours,
the curing depth of 2 ~ 4mm. With the extension of time, the curing depth increases gradually.
The 7 day curing depth 6mm.
Attention
Keep away from children.
If you accidentally come in contact with the skin, wipe in the curing a cloth before class, and using alcohol solvent scrubbing.
If the case of contact with eyes, rinse immediately with water, and medical treatment.
Recommended for use in a well ventilated place
Package
White:
310ml/Cartridge, 10Cartridges/box, 30Cartridges/carton
Black:
310ml/Cartridge, 10Cartridges/box, 30Cartridges/carton
Grey:
310ml/Cartridge, 10Cartridges/box, 30Cartridges/carton
Storage
310ml/Cartridge 12months
Cartridge User Guide:
Sausage User Guide:
Huitian China 5 Production Plants
Hubei Plant -- Construction Adhesive&Sealants /Car care adhesive
Guangzhou Plant -- Electronics adhesive
Changzhou Plant -- Photovoltaic adhesive
Shanghai Plant -- Packing adheisve
Yicheng Plant --Packing adheisve
Global Clients
FAQ:
1.Q:Delivery time ?
A: Normally,delivery time of sample order is within 7 days.
standard order is within 15 days.
2.Q:How to get samples ?
A: Normally,we offer 1-2pcs or 50-100g free samples for quality testing.
3.Q:How to be Our distributor ?
A: As the growing of Our global business,we need to find more and more distributors and agents
worldwide. Huitian will provide the best solution and service for our partners.
4.Q:Any OEM service ?
A: Yes. we can offer the customer OEM label service,and will give the protection of the your right in your market.
5.Q:Do you have MOQ ?
A:Yes.Normally,MOQ is 500pcs.
1420 Structural Acrylic Adhesive Bonding Industrial Adhesive Glue For Transport Vehicles
1420 High performance structural bonding acrylic adhesive
Typical Applications
Transport vehicles, notebook computer, mobile phone and other products such as structural adhesive bonding electrons.
Bonding material: ABS, glass steel, polyester (DCPD modified) polystyrene, polyethylene ester, PVC, polyurethane, coating
Carbon steel, aluminum and stainless steel recommended HuiTian primer 1020.
Item
Unit
Typical Value
Color
Component A
White
Component B
Blue
C omponent of Basic Materials
acrylic acid
Density
Component A
g/cm 3
0.96
Component B
1.13
Viscosity
Component A
mPa*s
160000
Component B
140000
After Mixed
Mix Ratio by weight (A:B)
10:1
Handing Curing Time
Min
25
Initial Curing Time
Hour
0.5
Full Curing Time
Hour
24
Tensile Strength
After Curing
Mpa
20
Elongation at break
%
Hardness
Shore A
Volume Resistivity
Ω*cm
Dielectric Strength
KV/mm
Flame Retardant Rating
UL94 V-1
Work Temperature
℃
-55~121
Surface treatment:
Remove dust, water, oil from surface; maintain the adhesive surface clean, carbon steel, aluminum and stainless steel recommended Huitian primer to reach 1020 best bonding results.
Mixing Adhesive:
Through a fixed mixing ratio of the mixing nozzle mix, with manual, pneumatic or equipment gluing
Gluing:
This product at 18 ℃ -27 ℃ environment construction to achieve the most ideal curing effect, below 18 ℃ curing slower, more than 27 ℃ curing faster. Effects of A and B components of the viscosity is affected by temperature, in order to ensure the measurement / consistent, effect of mixing equipment, the two components in the storage temperature to maintain a constant.
Gluing work must finish in operation time. Operation before the end of time, glue and positioning of the work piece to accurately completed, then keep the work piece in a fixed state until the end to remove positioning time.
Clean:
Before curing is easier to clean, wipe the lotion, overflow adhesive residue available containing citric acid, terpene resin or NMP degreasing agent scrub in order to achieve the best results. If the layer has been cured, carefully will layer off, and wipe the lotion good cleaning effect.
Matters need attention
1.This product is flammable, away from heat and flame, spark store or use.
2.Not including the adhesive materials: PP, PE, POM, PTFE, copper, brass
3.All stainless steel, aluminum, mixing equipment be Teflon or PE material. Filler, pump shall not use copper or copper alloy. The sealing ring must use Teflon, Teflon coated PVC, PE/PP, VITON, NBR, chloroprene rubber or other elastic body shall not be.
4.This product is curing very fast, generates a lot of heat when mass mixing, and may be accompanied by release of gas, steam and other volatiles. Therefore, should be in every time limited quantity in mixed operation time can run out, and the adhesive thickness is controlled within 3.2mm
Package
50ml/ Double tube, 12 double tube /carton.
380ml/ double tube, 12 Double tubes /carton
Storage
1.Store it in dry and shady places at the temperature of 12~24℃ is best
2.A component Ø Storage life: 12 months,,B component 9months
3. Could not frozen storage
7595 RTV Silicone Sealants Weather Resistance For Flange Joint Surface Seal
RTV 7595 silicone sealants, weather resistance, used for flange joint surface seal
Instructions:
1. Clean the thread surface, eliminate greasy dirt and dry it.
2. Squeeze a certain amount of glue into one of plane, form a continuous glue line, girding the parts to
sealing. Suggest to pneumatic pressure no more than 0.4 MPa.
3. Fold and seal two surfaces with bolts; initial curing within an hour, at 25 ℃, 50% humidity, completely cured in 24 hours. In cold or dry condition needs much longer time to cure.
4. If the glue not use up, please tight blocks and sealed nozzle immediately. If there is a little crust in the
mouth of tube, remove it, it will not affect the normal use.
Packing specification:
310ml/cartridge, 30 cartridges/ carton
Announcements:
This product must be stored far away from children.
If you carelessly touch eyes and skin, please wash it with water immediately.
Storage:
Stored in 8~28℃ cool and dry place. Shelf life is 12 months.
0113 Thermal Conductive Grease Gap Filler For CPU And Led Chip Nontoxic, non-corrosive to PCB and metal 2.1W/m·K
0113 TDS-EN.pdf
0113 is a one-component Silicone Thermal Conductive Grease suitable for gap filler and reducing the temperature of electronic components.
Product Features:
One-component, white;
Physical form: paste;
Wide working temperature range;
Nontoxic, non-corrosive to PCB and metal;
Eco-friendly, odorless;
Maintain dry and flowing at high temperature;
High performance on insulation, corona resistance, electric leakage resistance, and chemical resistance;
Can be manually glued or machine glued;
Thermal conductivity: 2.1W/m·K
Main Applications:
Widely used for the thermal conductivity of electronic components including the filling of gap between CPU and heat sink.
To fill the gap between high-power audion, thyristors and basic materials such as copper and aluminum reduce the temperature of electronic components.
Item
Unit
Typical Value
Item No.
0113
Physical Form
paste
Color
white
Main Component
polysiloxane
Density
g/cm 3
2.9
Penetration Degree
1/10cm
280
Volatility(200℃,24h)
%
0.2
Volume Resistivity
Ω*cm
1.0×10 15
Dielectric Strength
KV/mm
24
Breakdown Voltage
KV/mm
20
Surface Resistance
Ω
2.4×10 14
0.1mm Thermal Resistance
m 2 K/W
0.00011
Work Temperature
℃
-50~200
Heat Conductivity Coefficient
W/(m·K)
2.1
Packing:
2kg/bucket, 6bukets/carton
Storage:
Store it in dry and cool places at the temperature of 0~35℃
Shelf life is 12 months
4010 Silicone Sealant For Household Panel And Microwave Oven Door Glass
RTV-2 Silicone Sealant 4010 for household panel and microwave oven door glass
● Product Features:
Ø 4010 RTV-2 adhesive sealing silicone is a two-component, semi flowing, black room temperature vulcanized silicone.
Ø Cured adhesive for elastomers; neutral curing, non - corrosive to most metals; extrusion is excellent, especially suitable for machine glue, glue line smooth and delicate;
Ø Could be matched with RTV-2 automatic glue machine glue, the glue line smooth and delicate;
Ø Excellent resistance to hot and cold alternating performance, aging resistance and electrical insulation properties; adhesive has excellent moisture, quake resistance, corona resistance, anti leakage performance; completely in line with the EU ROHS
● Main Applications:
Ø The sealing adhesive household panel, such as adhesive, microwave oven door glass and metal frame in microwave furnace and the microcrystalline panel bonding.
● Specifications & Packages
Ø 310ml/cartridge, 25cartridges/carton.
Ø 18Kg/bucket, 1bucket/carton
● How to Use
Ø Keep the object surfaces clean without rusts, dusts and oil.
Ø Dispense the sealants to object surfaces.
Ø Put the objects in the air for 24 hours in the condition of room temperature & 55%RH to reach a cure depth of 2~4mm the longer, the deeper.
Ø The outlet of unspent adhesive should be sealed in time, clean the crusts on the outlet for another use within a short time, the performance of adhesive won’t be affected.
● Storage:
Ø Keep the sealant away from children.
Ø Use it in ventilated places
Ø In case of contact with skins, wipe and then flush with clear water.
Ø In case of contact with eyes, flush with clear water immediately and go to hospital for checking.
Ø Store it in dry and shady places at the temperature of 8~28℃
Ø Storage life: A component 12 months and B component 6 months from the date of manufacture.
● Technical Data
Item
Unit
Typical Value
Range
Item No.
4010
Color
Black
Component of Basic Materials
Polysiloxane
Density
g/cm 3
1.12
1.10 ~1.15
Tack Free Time (25℃,50%RH)
min
20
20
Hardness
Shore A
40
40±5
Tensile Strength
Mpa
1.0
≥1.0
Elongation at break
%
150
≥150
Dielectric Strength
KV/mm
20
≥20
Work Temperature
℃
-60~200
Anti Aging Black Gasket Maker Sealant Rtv Silicone Sealant For Autos Repair
Black Sealant , RTV silicone sealant for autos repair,55g/pc,110g/pc, Gasket Maker Sealant
• Good weather resistant ability.
• One-component,low ordor,non-corrosive,easy to apply.
• Persistent water proofing.
• Good adhesion, red,black,white,grey,blue,clear to choose.
Black Power-seal sealr after contact with moisture-cured to form a silicone rubber gasket having flexibility. The product has anti-aging,weathering, heat,will not har den, shrink or crack and other properties. It is mainly used engine oil pan, transmission gear cover, axles and other parts of the bonding and sealing. This product is suitable for a temperature range of -60 ℃ ~ 260℃
Typical Usage
This product is not binding limit the size and shape of the face, can replace a variety of rubber, asbestos mat, cork pad and paper pad, to the flange of the automobile, motorcycle engines, gear boxes, axles and various machinery and equipment combined with the implementation of the sealing surface.
Technical Data
Properties before Curing
Typical Value
Limits
Density(25℃),g/㎝3
1.4~1.6
Viscosity’s
5~15
Mobility, mm;
3min,25℃
≤10
Odor
No odor
Dry Time, min:
(Curing Condition: temperature 25℃,50±5%RH)
10~30min
Properties after Curing
Tensile Strength, N/mm2
≥1.0
Tensile Strength, %
150~300
Hardness shore A
30~45
How to Use:
1, with cotton and organic solvent to be sealed remove surface oil and impurities.
2, the plastic tube in a suitable whole cut beak, with the glue gun glue to end faces to be sealed, and allowed to form a continuous plastic ring.
3 close two seal faces and secured with bolts.
4, one hour early solid, at 25 ℃, 50% humidity, fully cured within 24 hours. In cooler or dry conditions takes a long time to cure.
5, sealed hose sealant remaining can be used until the next one.
Storage:
Storage In a cool dry place for one year.
Packaging
55g/pc, 100pcs/carton
9661E High Performance Electrical Bonding and Sealing Compound for LED lamp
9661E(9665E) High Performance RTV Silicone small pack for LED lamp bonding
● Product Features :
Single component, room temperature curing, dealcoholization type.
Neutral curing, becoming elastomer after curing.
Alcohols released after curing, no irritant smell generated, non-corrosive to carbonate ester & copper materials.
High thermal distortion and stress strain resistance.
High temperature and humidity resistant.
High performance on insulation, damp Proofing, vibration resistance, corona resistance, electricleakage resistance and chemical resistance.
● Main Applications :
For the sealing and bonding of car light cover, decorative lighting and LED lights.
Suitable for outside environments.
● Specifications & Packages
310ml/cartridge, 25cartridges/carton.
● How to Use
Keep the object surfaces clean without rusts, dusts and oil.
Dispense the sealants to object surfaces.
Put the objects in the air for 24 hours in the condition of room temperature & 55%RH to reach a cure depth of 2~4mm the longer, the deeper.
The outlet of unspent adhesive should be sealed in time, clean the crusts on the outlet for another use within a short time, the performance of adhesive won’t be affected.
● Storage :
Keep the sealant away from children.
Use it in ventilated places
In case of contact with skins, wipe and then flush with clear water.
In case of contact with eyes, flush with clear water immediately and go to hospital for checking.
Store it in dry and shady places at the temperature of 8~28℃
Storage life is 6 months from the date of manufacture.
5299W-S Two Component Photovoltaic Adhesive For PV Junction Box Potting Sealant
5299W-S TDS.PDF
5299W-S is a two-component potting sealant suitable for PV junction box potting.
Features
1) Fast room temperature curing speed,
2) Excellent production efficiency, easy to use
3) High hardness, high thermal conductivity
4) Good electrical performance
5) Excellent water resistance, chemical resistance, high temperature, and humidity resistance
6) Good yellowing-proof and excellent aging resistance
Applications
Suitable for photovoltaic module junction box potting
Packaging
A: 10kg/barrel; B: 2kg/barrel